Wire Detector,ZOTO Multifunction Wire Scanner,3 in 1 Wireless Wall Detector,Wire Finder for Stud/AC Wire/Metal/Pipe/Wood Searching Tool

November 6, 2019 - Comment

As an Amazon Affiliate I may make a small commission at no extra cost to you if you purchase the product below or any other product on my website. With the wall stud finder quickly and easily locates the edges and center of metal studs and joists behind walls, floors and ceilings. Its easy-to-read display

Buy Now on Amazon! £17.99Amazon.co.uk Price
(as of November 16, 2019 7:00 am GMT+0000 - Details)
As an Amazon Affiliate I may make a small commission at no extra cost to you if you purchase the product below or any other product on my website.

With the wall stud finder quickly and easily locates the edges and center of metal studs and joists behind walls, floors and ceilings. Its easy-to-read display screen indicates directions, edges and center of studs, while Wire Warning detection indicates the presence of live AC voltage

Features
– Stud mode: detect metal studs with 1/2 inch, 1 inch and 3/2 inches mode
– Metal mode: detect metal pipes, rebars etc up to 3 inches
– AC mode: detect unshielded AC live wire up to 3 inches

Important Tips
-Positioning: For proper use, always place this product flat against the surface before powering on
-Power on: Press and hold the Scan button continuously while in use
-Calibration: Place it flat on wall first. Then press and hold the Scan button, and keep the unit still until calibration is complete(1-2 seconds). When calibration is complete, the unit will sound a short beep and the display bars will be cleared
-Operation: Keep it flat against the wall and move the unit slowly. Do not rock or lift it
-While calibrating, the device must not be placed directly over a stud, dense material such as metal, or over a wet or newly painted area, or it will not properly calibrate. If all segments of the middle LCD parts flash on and off, and intermittence beeps when the activation button is pressed, move the device to a different location, release the activation button and try to calibrate again
-Detector will not detect AC live wire from a shielded position
-Before scanning, please check the thickness of the position be detected is fit for detection
-Detection depth and edge detection can vary due to moisture content of materials, wall texture, paint, etc

Package Contents
1 x Stud Finder

Comments

Anonymous says:

A top device for a great price I bought this tracking device, because we renovate my grandmother’s kitchen, bathroom and living room and do not know where the cables / water pipes go.The device was shipped as always by Amazon fast and was optimally packed. I have unpacked it and tried it once in my house, because I know where all the cables were laid. And I have to say that the device has recognized all lines, including those that were very deep in the masonry. Even with my grandparents everything worked, with the…

Anonymous says:

Simple and accurate, a must for anyone’s toolbox

Customer Video Review Length:: 0:07 Mins A simple and sensitive device to check for studs, wires, pipes etc in walls.This is a must for any DIY’er to make sure your drilling into what you should be, for safety reasonsalone you should have one of these!I will be using this for checking for electric cables in walls, see video attached, highly accurate in allsituations I’ve used this for so far.

Anonymous says:

Very Useful DIY Tool Bought this detector as we needed to hang the pictures and secure the furnitures to the wall.The detector is very sensitive and accurate, it is very simple to use and it has a great feature showing the centre of the stud.Anyone doing DIY and drilling holes in walls should have one of these in their toolbox.

Comments are disabled for this post.