Manelord Auto Paintless Dent Repair Tool – Adjustable Width Gold Dent Lifter, Dent Repair Puller with Pop a Dent Out Puller Tabs for Car Hail Damage Repair and Car Dent Removal

November 7, 2019 - Comment

As an Amazon Affiliate I may make a small commission at no extra cost to you if you purchase the product below or any other product on my website. Professional Adjustable Width Gold Dent Puller do the dent repair job for you. Save cash and enjoy your time while you witness these tabs recover your

Buy Now on Amazon! £24.99Amazon.co.uk Price
(as of November 16, 2019 10:57 am GMT+0000 - Details)
As an Amazon Affiliate I may make a small commission at no extra cost to you if you purchase the product below or any other product on my website.

Professional Adjustable Width Gold Dent Puller do the dent repair job for you.
Save cash and enjoy your time while you witness these tabs recover your car’s dents like it’s never been damaged before.

Please don’t worry about how to use this kit even if you never handle it before. Our package coming with detailed repair steps introduction for operate, it makes the dent removal process easily.

Packing list
1 x Adjustable Width Gold Dent Puller
16 x Black glue puller tabs
2 x Glue shovel
1 x Empty alcohol bottle
1 x Black Clean Cloth
1 x Instructions

Note: ( No Hot Melt Glue Gun,Glue sticks and No Alcohol Included )
Easy to use:
(Suit for dent&ding and home DIY repair) Step 1.Clean dent surface.
Step 2.Put the glue sticks to gun and heat, connect the power source and preheat for 5-10 minutes.
Step 3.According to the dent size to choose the Glue Puller Tab, then put the heated glue on puller tab, immediately place puller tab in the center of the dent and hold on until it sticks.
Step 4.Let the glue cool for about 8-10 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter.
Step 5.After the glue cooling, use a golden dent lifter or bridge dent puller to align and press the puller to pull up the dent. Repeat the above steps until the dent disappear.
Step 6.After finishing the dent,use the alcohol to clean the glue which on the car and the puller tabs.
Note:
For detailed operation, please refer to the instruction manual.

Comments

Anonymous says:

Not quite what I was expecting The positives: It seems a well made peice of kit. Nice and light with loads of different ( 13) alternative pullers in different sizes shapes and patterns to glue on the car.The negatives:NO GLUE. The pictures give the impression that you get the glue but reviewing this it doesnt. I cant see where to buy the glue The instructions. There are no instructions as to which of the pullers to use for what job. Some are very odd and I have NO idea why or when to use…

Anonymous says:

This does work I was unsure if these things do what was claimed but, after being quoted £900 to take out 2 small dents on the top side of my rear door panel, I thought I would try this product out.I watched some videos on youtube to get an idea of what to do while waiting for the puller to arrive, I ordered it on a friday evening and it was delivered on the sunday, I was stunned, any way I went straight out and started to try it on the dents, 2 hours later with a smile on my face, thank you very much…

Anonymous says:

Brill product but better glue needs to be found. It is a sturdy bit of kit and does just what it is advertised it has many different sized pads which i think would meet most requirements however the glue is key to success and in my case thats what I’m struggling with. Now my glue sticks are a few months old so dont know if that could lead to lack of adhesion, but will get some new sticks and try again..better glue would make this sooooo good.

Comments are disabled for this post.