Description
From the manufacturer
Precise and gentle plunge cutting due to rounded cutting edges of the plunge cut saw blades with Curved-Tec.
Consistently high performance even under load thanks to Bosch Constant Electronic.
Optimum guidance due to optional attachment of an auxiliary handle.
Continuously variable preselection of the oscillation rate enables you to gear your work towards the material and application.
Bosch PMF 220 CE Multifunction Tool
Basic
The Bosch PMF 220 CE multifunction tool helps DIYers with all renovation and repair jobs. Its power 220 watt motor with Bosch Constant Electronic and the continuously variable preselection of its oscillation rate enable you to work quickly and to gear the tool perfectly towards the material. The Starlock toolholder and a wide range of accessories make the PMF 220 CE exceptionally versatile. The magnetic toolholder allows for effortless changing of accessories
- Versatile tool thanks to a wide range of innovative Bosch Starlock accessories
- Convenient, effortless changing of all accessories thanks to magnetic toolholder with universal screw
- Maintain an exact cutting depth using the 4-stage depth stop
- Faster work rate thanks to powerful 220 watt motor
- No-load speed: 15.000 – 20.000 rpm
- Oscillation angle on left/right: 1.4 °
- Magnetic tool holder
- Oscillating system
- Depth stop
Part number 0603102070
Comes complete with:
- BIM segment saw blade Wood and Metal, 85 mm, ACZ 85 EB (2 609 256 943)
- Delta sanding plate 93 mm, AVZ 93 G (2 609 256 956)
- Delta sanding sheet set (2 609 256 A54)
D. Milne –
I’m in the middle of a serious DIY project at the moment. I needed to replace a short section of skirting which had been damaged by a water leak. That wall was old lath and plaster and I knew from past experience that I could seriously damage the plaster trying to get the skirting off. Then I saw people on YouTube using a multitool similar to this one for the job, so after comparing specs and considering the reputation of the manufacturer I eventually bought this one.I specifically wanted to avoid cordless versions of the tool since I don’t expect to use it often, and didn’t want the battery to die of neglect between uses. But, once I had the tool I was surprised by how often I found a use for it, where it was clearly the best tool for the job. For example I had to cut an access hole in a plasterboard wall in order to fish some network cable. Plunge cutting with one of the supplied blades made short and accurate work of that!Another was cutting away the tongue on some floorboards I needed to lift (that network cable again). Again this tool did it easily. I’ve used a circular saw for this job in the past, but the circular saw takes a lot of setup to avoid plunging too deep and is frankly a bit scary to use that way (have to pull the guard open, don’t fancy hitting a nail with one of them). With the multitool you just put the right blade in and start cutting: progress isn’t as fast but in many ways that’s a good thing for an amateur. You can feel in your hands when you’re through, so there’s little danger of slicing right through and hitting a cable or water pipe, especially if you choose a short blade.As to that rotted skirting, it was a doddle: I made a scarf cut over a stud just past the nails and simply lifted the skirting away. Absolutely no chance of damaging the plaster, I literally can’t think of any other tool I could have used.Only one downer, nothing to do with the tool itself: Amazon suggested that “customers also buy” a pack of 10 “wood+metal” blades, not Bosch made. Those were absolutely useless. I had a floorboard screw that was spinning in its hole so I thought I’d cut it out, having removed the neighbouring board. The cheap blade only made it halfway through the 4mm screw before it was completely blunt. Yes I know the genuine Bosch blades are expensive, and frankly you can say what you like, but I won’t be wasting my time on any more cheapo blade sets for this thing.Recommended. A multitool is simply the best tool for some jobs, and this Bosch corded tool seems to be good quality and has a nice quick tool change mechanism. Obviously I can’t say anything about longevity.
Brian Martin –
Bosch make long lasting robust power tools, this Multi tool is no exception. It is heavy enough to do the job but light enough that your hand and arm don’t end up aching. This particular model comes with a good selection of attachments for a variety of different uses. Having the power lead saves the inconvenience of worn out batteries and keeps a constant speed. Well worth the money.
A. Roberton –
I enjoy doing a bit of DIY and often the small jobs turn out the most awkward. 8 years ago I bought one of the first of these multitools available and have used it a lot over the years. A small job came up, perfect for the multitool, but sadly after 5 minutes it died – not that I complain as it has done me well.So I sent for this one, to replace my old trusty one. What a difference!It is quite a bit more powerful and does the ‘small’ jobs even quicker and, I have to say it, neater too. The reason is twofold. Firstly being more powerful – bigger and better motor – it is also faster so goes through wood far far easier. Secondly, the new ‘Starlock’ system is a vast improvement too. The blades that came with this new one are sharper, better made and of course, are the Starlock ones.On the negative front, it means I have to buy new blades as my old ones would not fit without an adaptor – I will get an adaptor but actually prefer the new system as I feel safer with it too.For anyone who has never had one of these multitool machines before and are thinking they might take the plunge, don’t delay as it will change your work attitude forever as now the small jobs really can be ‘small’ jobs.
Nicholas E. –
Fantastic quality, and easy to use. The tools/blades which come with it are really useful and versatile. The tool can do so much more than your standard jigsaw and circular saw..one tool does many things. I wish had bought one years ago, would have saved me time and done a better job.
j –
I have never owned a multitool before and I came up against a job no other power tool could deal with due to access issues. I bought the 350 CES for the easy grab feature which means you can change the attachment simply by pushing the star down on the attachment. It has a satisfying click when it locks and holds the attachment firmly so there is minimal power lost to vibration. In fact mine hardly vibrated at all. It is very powerful and easily took care of my task, cutting through wood and nails with ease. But the blades do get blunted with heavy use and are of quite thin metal so will need to be changed regularly but no more frequently than the corresponding jigsaw blade. The reciprocating action is not as strong as the rotational motion of a grinder, but the thin blades are better for more detailed work when you want to be careful not to damage surrounds. The light was not a big issue for me until I used it. I expected a rather faint glow as you often see with low budget items but this was really bright and lit the work surface really well so I was glad I had the feature. The item was delivered on time and in perfect condition by amazon. I would strongly recommend the 350 for its power, its easy attachment changes, lack of vibration and powerful spotlight.
MR K Lee –
Really impressed with this tool super quick to change blades nice to handle in handBlades are a bit pricey but do last longer
BelBel –
Used a friends for cutting into a floorboard and was so impressed that I bought one with lots of accessories for myself. This latest model has a nice quiet/slow start which helps to maintain it for a longer life. This time I ordered Part Number 0603102071 which has a UK three pin plug. (However the plugs are not shown in the photos and I first ordered the part number 0603102000 which only has a two pin plug which is only mentioned in the technical details).
J. E. Atkins –
Good multi tool. Does what it says on the tin!
maxcat –
I bought this for panelling out a shed plus removing an entire bathrooms worth of tile grout. Performed flawlessly. Every DIYer’s toolbox must have one of these. A truly superb and versatile bit of kit.
Eric Fenwick –
Got me out of trouble cutting up 22mm chip board flooring after a heavy water leak. Sliced through softwood skirting in no time too. Good addition to my tool kit.