Circular Saw, GALAX PRO Mini Circular Saw 705W 3500RPM, Laser Guide, 3 Blades, Cutting Depth 28mm(45°) 42.8mm(90°), Ideal for Wood, Soft Metal, Tile and Plastic Cuts – 766V-L

February 24, 2020 - Comment

Durable and Powerful Motor Powerful 705W motor deliver full-size performance at 3,500 rpm to cut through wood, plastic, PVC pipe, plaster board and bamboo in a single pass Adjustable Cutting Depth & Bevel AngleBoth depth and bevel cutting can be adjusted, maximum cutting depth at 90 degrees is 42.8mm and bevel capacity at 45 degrees

Buy Now on Amazon! £64.99Amazon.co.uk Price
(as of April 19, 2020 11:46 am GMT+0000 - Details)

Durable and Powerful Motor
Powerful 705W motor deliver full-size performance at 3,500 rpm to cut through wood, plastic, PVC pipe, plaster board and bamboo in a single pass

Adjustable Cutting Depth & Bevel Angle
Both depth and bevel cutting can be adjusted, maximum cutting depth at 90 degrees is 42.8mm and bevel capacity at 45 degrees is 28mm

Double Safety Switch
With double safety switch controller, only when you press the two button, can the start to work, avoiding hurt.

Dust Pipe Included
A dust pipe is provided to maintain a clean working place with no saw dust caused. Just attach the pipe into the adapter port, connect the other side to a vacuum cleaner and you can start your work.

protective Lower Guard
The lower guard not only protects the blades for good maintenance to extend its service life but prevents you from being hurt by the sharp blade to assure you of a safe operation.

Specifications:
●Voltage: 230V/50HZ
●No Load Speed: 3500 rpm
●Rated Power: 705 W
●Max Cutting Depth:
 90°: 42.8mm
 45°: 28mm
●Bevel Capacity: 0~45°

Package contents:
1 x GALAX PRO mini circular saw
1 x 24T blade for wood
1 x 60T blade for soft metal
1 x diamond blade 60T for tiles
1x hex key
1 x Dust suction pipe
1 x user manual
24 months warranty

Comments

Anonymous says:

Can now get straight cuts I like that this has a laser guide on it. It has really helped me to get straight cuts as I have always struggled to do that without drawing a straight edge with a pencil first. The cutting depth is adjustable depending on what the bevel has been set at – I’ve only needed to use it for 45 and 90 degree cuts and found that it can go as deep as an inch. It is pretty lightweight so can be operated using just one hand very easily too as that was a worry when I first bought it. My only gripe with…

Anonymous says:

DIY must. One of the better mini circular saws I have used

Comments are disabled for this post.