Evolution Power Tools Diamond Blade, 210 mm

October 30, 2019 - Comment

As an Amazon Affiliate I may make a small commission at no extra cost to you if you purchase the product below or any other product on my website. Related Posts Evolution Power Tools Diamond Blade, 255 mmBLADE, DIAMOND, RAGE3, 255MM Abrasive Grade – – Abrasive Material – Diamond Bore Size -… Evolution Power Tools

Buy Now on Amazon! £19.95Amazon.co.uk Price
(as of November 18, 2019 6:56 pm GMT+0000 - Details)
As an Amazon Affiliate I may make a small commission at no extra cost to you if you purchase the product below or any other product on my website.

Comments

Anonymous says:

Used to cut tarmac and concrete I used this to cut a trench outside in tarmac and concrete to lay an electricity cable. Nice straight cuts and very easily done. Very useful.

Anonymous says:

This blade didn’t last a day. These blades are great when they are new, for cutting thin/ thin walled material at a right angle.The specs for this blade say it cuts stainless steel plate.I made 1 angled cut on 100 x 10mm flat bar, I had to cut it on the wide face because of the angle, and that ruined the blade.It couldn’t cut anything after this.Obviously I contacted Evolution about this to complain, they recommended that material is cut always on the thin edge to ‘prolong blade life’, using the vise…

Anonymous says:

Using it for extreme cutting (dense, hard, 76mm thick firebricks) and it’s working like a charm! In the process of building a piza oven, I attempted to cut the very hard and tough firebricks with the tried and tested hammer and chisel technique, which was an utter disaster – rough edges, broken bricks etc. Firebricks are way too hard for the traditional approach AND a seamless neat finish. I didn’t want to waste another firebrick (they are £1.70 each!), so I started looking to see what I could find to work with my current power saws.Bought the evolution diamond disk (to match…

Comments are disabled for this post.