Solder Seal Wire Connectors, 100pcs Waterproof Solder Wire Connectors Heat Shrink Cable Sleeves Insulated Solder Connectors Electrical Connectors

July 14, 2019 - Comment

Our heat shrink wire connectors is Waterproof and Insulated, ideal for automotive, railway, watercraft, aerospace, electrical and electronics industries etc. How to connect: 1. Select the right size of connectors for the wires. 2. Insert 2 wires into the connector. 3. Heat the cable sleeve by heat air gun or lighter until it is shrunk

Buy Now! £15.99Amazon.co.uk Price
(as of September 17, 2019 11:45 am GMT+0000 - Details)

Our heat shrink wire connectors is Waterproof and Insulated, ideal for automotive, railway, watercraft, aerospace, electrical and electronics industries etc.

How to connect:

1. Select the right size of connectors for the wires.

2. Insert 2 wires into the connector.

3. Heat the cable sleeve by heat air gun or lighter until it is shrunk in size when the solder ring melted and the adhesive flows, filling gaps within the terminal.

Specification

25 x white connectors; AWG: 26-24; Diameter 6.0 mm

35 x red connectors; AWG: 22-16; Diameter 4.5 mm

30 x blue connectors; AWG: 16-12; Diameter 2.7 mm

10 x yellow connectors; AWG: 12-10; Diameter 1.7 mm

Shrinking ratio: 2:1

Operating temperature :-55℃ – 105℃ 

Shrink temperature : >115℃ 

Minimum temperature for solder to melt: 118°C 

Dielectric strength: 1kv

Protection class: IP 67

We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please contact us. We will work on every inquiry to ensure your satisfaction.

Comments

Anonymous says:

Great product, which works very well. It’s very simple to use – you need to move it to the wall, it can be used to detect the position of cables and wooden beams on the wall, etc. Find the nails and wires behind the wall, simple but good design, it has a selection mode Press the scan button and smooth it along the wall, it will beep and show how far it is from it, which works well for DIY.I loved the product and would recommend it to anyone!

Anonymous says:

Easy way to solder and waterproof a connection This is a very nice little set neatly packed in a clipped box. The selection of solder seals provided covers 10-26 gauge wiring, ideal for users who are not keen on soldering wires together. Although a lighter can be used, a reputable heat gun would be quicker and more reliable. Upon using this solder seal, the technique is to heat the item up until the solder melts, this usually happens a few seconds after the heat shrink is fully shrunk so direct heat to the solder (centre) section…

Anonymous says:

Useful Connector Set I like the idea but was skeptical at first and, to be honest, it took me a couple of goes to get a satisfactory connection as it’s sometimes quite difficult to see when the solder has properly melted. I did 3 or 4 test connections to get the hang of it but then they worked really well. I used a heat gun on max, it may be better with something slightly less hot. Good sizes included, suitable for most DIY applications. I used them for car electrics repairs.

Write a comment

iweb besucherzähler